|
|
|
|
|
|
|
|
 |
|
|
|
| |
|
For
Model C177: The Power
Team single stage hydraulic hand pump
provides 10,000 PSI pressure in a
lightweight and compact design. Hydraulic
hose supplied is 2-ply, 1/4”
I.D. reinforced with two braids of
high tensile steel wire and have a
20,000 PSI burst rating with an oil
and weather resistant rubber coating.
|
|
 |
| |
|
For
Models C600 and C850:
The Power Team two stage hydraulic
hand pump provides high oil volumes
at low pressure for faster initial
squeeze then switches to a low volume
high pressure stage as resistance
builds. These pumps also incorporate
a needle valve to control the release
operation to avoid damage to the pipe,
and one pump can be used for two tools.
All hoses supplied are 2-ply, 1/4”
I.D. reinforced with two braids of
high tensile steel wire and have a
20,000 PSI burst rating with an oil
and weather resistant rubber coating.
|
|
 |
| |
|
For
Model C1200: The Power
Team air/hydraulic pump features a
foot operated mechanism and pressure
gauge for ease of use. These pumps
also incorporate a needle valve to
control the release operation to avoid
damage to the pipe, and one pump can
be used for two tools. All hoses supplied
are 2-ply, 1/4” I.D. reinforced
with two braids of high tensile steel
wire and have a 20,000 PSI burst rating
with an oil and weather resistant
rubber coating. |
|
 |
|
|
|
|
